Products 301-312 of 382
Manley "Turbo Tuff" Rods 2JZ, 4B11T, B18C, EJ20, EJ25, H22, K20, K24, RB25, RB26, SR20, VQ35DE, Supra, SR20, SR20DET, SR20VE, SR20VVL, 20V, P11, P12, S13, S14, S15, B13, B14, Pulsar, GTiR, FWD, RWD, 240SX, 200SX, 180SX, Silvia, NeoVVL, Kouki, Zenki, Sunny
Price: Select Motor
Availability: In Stock

Manley rods are forged from 4340 aircraft quality vacuum degassed material. Shot peened after machining and 100% magnafluxed. Cap fasteners are 3/8" ARP 2000 cap screws. Specifically designed to handle high horsepower applications when using turbo and/or nitrous. SR20 rods can be machine to accept the 19mm bearing.

Mazworx SR20 Billet Main Caps with 1/2" Studs
Price: $655.00
Availability: In Stock
Mazworx Item #: 91100 -

Our SR20 billet caps are machined from pure 4140 chromoly steel. Engine will need to be machined to accept the new 1/2" main studs and a line bore/hone will be needed once these are installed. We can provide these services if needed.

GReddy Hi-Capacity Oil Pan SR20
Price: $395.00
Availability: Special Order
Greddy Item #: 13525901 -

Functional as a secondary oil cooler, GReddy high-capacity Oil Pans, maintain more constant oil temperatures via increased volume of oil and the improved cooling efficiency of the thick-walled cast aluminum construction. They also include specially designed interiors to keep the oil at the oil pump pick-up for engine reliability. +1000cc, swing baffles, ports

Mazworx SR Dry Sump Kit
Price: $3,625.00
Availability: Built to Order 1-2
Mazworx Item #: 30100 -

The use of a wet or dry sump oiling system is often determined by the level of competition and the racers budget. A wet sump system is based on the OE oiling system and can be enhanced by certain components to improve oil control and increase power. A dry sump system is designed for the top levels of racing where maximum power and oil control are absolutely essential. Here are several advantages of dry sump over oil sump setups: - Because a dry sump does not need to have an oil pan big enough...

SR20 ACL Race Bearing Kit
Price: $116.18
Availability: In Stock
ACL Item #: 1T2964 -

They are an H-Series (harder material and more clearance) race bearing. These will fit in standard SR rods and mains.ACL Thrust Bearings for any SR motor. These can be used in standard rebuilds or all out race motors.HX Bearing give 0.001" extra clearance.19mm Rod Bearings require machining of rods.Single hole Main Bearings not available.

Mazworx Power Steering Adapter Kit, VH to S-Chassis
Price: $155.00
Availability: In Stock
Mazworx Item #: 10165 -

The kit includes everything you need. High Pressure Line with adapter fittings, Low pressure line, feed line, fire sleeve and misc hardware.

KA24E Exhaust Flange
Price: $45.00
Availability: In Stock
Mazworx Item #: 965507 -

Specifications: - Made from 1/2" thick 1018 cold rolled steel - CNC machined - Stepped to accept 1 1/2" sch. 10 pipe Made in the USA.

Mazworx VH45DE Headers, S13/S14 (set) S13, S14, S15, RWD, 240SX, 200SX, 180SX, Silvia, Kouki, Zenki
Price: $629.00
Availability: In Stock
Mazworx Item #: 10162 -

These headers are for the VH45DE swap into an S13/S14 chassis. The stock manifolds on the VH do not clear the frame rails or steering column. So using these headers clears them and also gives you more power with the header construction. Some clearaning required and designed to fit our motor/trans mounts. WILL NOT FIT OTHERS SWAP MOUNTS.Shown with optional coating.

Seadoo Rotax 1/2" Head Stud Kit
Price: $180.00
Availability: Built to Order 1-2
Mazworx Item #: R12HSK -

More boost means you need more clamping force on the head gasket. This upgrades the current 11mm studs to 1/2" (12.7mm). Allows more torque on the stud without excessive stretching. Requires machining to block and head (see machining section).

Mazworx SR20 Cam Timing Tool SR20, SR20DET, SR20VE, SR20VVL, 20V, P11, P12, S13, S14, S15, B13, B14, Pulsar, GTiR, FWD, RWD, 240SX, 200SX, 180SX, Silvia, NeoVVL, Kouki, Zenki, Sunny
Price: $15.00
Availability: Back Order
Mazworx Item #: 10000 -

Cut from 1/8" aluminum, this tool is great in help setting your cam timing. Just align the marks on the tool with the cam gear and install the chain. Perfect tool when installing new cams or head gasket.

Darton SR20 Dry Sleeves
Price: $420.00
Availability: In Stock
Darton Item #: 300-035-SF/DF -

The Darton SR20DET Dry Sleeve Kit is made from Darton's famous high strength Ductile Iron and designed specifically for the Nissan SR20DET blocks. The new sleeves will be supplied for bore sizes from 86mm - 90mm. The new multi-diameter sleeve, with flats assures max-wall thickness for strength at any bore size.

Darton Rotax MID 102mm Sleeve Kit
Price: $875.00
Availability: Special Order
Darton Item #: 800-850 -

These are custom made Darton MID Sleeves for the Seadoo Rotax motor. They come ready for a 102mm bore and can be bored to 104mm. The MID design allows you to replace the sleeve if it is damaged. CNC machining is required for installation. Check our machining section for services.