Shop Online

This item is for the fabrication service only.  You will need to send your cross member in.  Return shipping will be calculated when it's ready to be shipped back.

Picture shows Stage 2 package. Our Stage 3 engine package is designed for engines making 800-1200 hp. ***Stage 3 Short Block***Labor:Disassemble Short BlockHot Tank/CleanSand Blast/Paint Block, IronMachine for Threaded Oil Port PlugsMachine for Threaded Freeze PlugInstall Billet Mains and GridleResurface Block, InlineResize Cylinder w/ Torque PlateResize Line BoreClean, Check, Polish, Balance CrankAssemble Short BlockParts:CP Pistons, 86.5mm x 10:1 CR Heavy DutyUpgraded Wrist Pins 9310, .250"...

Billet SR20 RWD A/C Bracket. This bracket will work with all RWD SR20 compressors along with the KA24 and VQ35DE.Will need to swap the tensioner hardware and pulley from your OEM bracket.

This package is designed for Street Applications making 1200hp+.   Short Block, Stage 2.5Labor:Hot Tank/CleanSand Blast/Paint Block, IronMachine for Threaded Oil Port PlugsMachine for Threaded Freeze PlugResurface Block, InlineResize Cylinder w/ Torque PlateResize Line BoreClean, Check, Polish, and Balance CrankAssemble Short BlockParts:CP Heavy Duty Pistons 86.5mm 10.0:1 CRManley Turbo Tuff Rods CA625+ACL Race Bearing SetMazworx Billet Main CapsRSP/ARP CA625+ Main StudsMazworx...

Exedy Release Bearing required for SR20 Twin/Triple Disc Clutches still using the factory fork and carrier.

The Mazworx Stage 2 4B11 Short Block rated up to 800hp. Built with the following components:Labor:Disassemble Short BlockHot Tank/CleanSand Blast BlockRemove/Retap/Replace Oil Port PlugSleeve Install, Darton MIDResize CylindersUse Torque Plate During HoningStep DeckResize Line BoreClean, Check, Polish, Balance CrankAssemble Short BlockParts:CP Pistons, 86mm 9:1 CR, Upgraded Wrist Pins .200" WallManley Turbo Tuff RodsACL Race BearingsDarton MID SleevesARP Main StudsMisc PlugsCustomer...

Pinch bolts for the cylinder head.  These are the front 2 small bolts that clamp the head to the oil pump and the 2 small bolts on the exhaust side.For 52F and 65F head castings, select RWD. For all other, select FWD. If using a VE head on a RWD application, you will select FWD.

Mazworx/Artech G25-550/660 Top Mount Turbo Kit. This kit is capable of making over 500whp!This kit does not fit the VE head properly. Features the following items : Artec Stainless Top Mount Turbo Manifold Garrett G25-550 Ball-Bearing Turbo (G25-660 Optional) Garret Stainless Steel Vband Exhaust Housing Tial MVR (44mm) Wastegate Wastegate Dumptube Mazworx 3" 2pc V-Band Downpipe Assembly Complete oil feed, oil drain, water stainless steel braided lines. Options4" Intake KitRoute...

Made from stainless steel mandrel bend tubing. Designed for our Mazworx SS Series Top Mount manifold using a Garrett G25-G35 turbo.  Full upper and lower downpipes.  3" 2 bolt exhaust flange at the end.  V-Band clamp for the exhaust housing sold separately (typically comes with the turbo).