Products 241-263 of 263
Show
Mazworx Vacuum Bar
Price: $15.00
Availability: In Stock
Item #: 10188 -

3- Ports 1/8" NPT1- Port 1/4" NPT

Mazworx SR20VE Intake Flange
Price: $150.00
Availability: In Stock
Item #: 10197.1 -

Specifications: - Made T6061 billet aluminum - CNC machined - Fuel injector holes located to factory size and angle - O-rings included

Mazworx VQ Exhaust Studs Kit
Price: $79.98
Availability: In Stock
Item #: 12151 -

Tired of snapping your old rusty OEM exhaust studs? Our stud kit completely replaces your old hardware for the exhaust manifold on your VQ series engine.

Mazworx SR20VE Camshaft Cap Bolt Set
Price: $31.95
Availability: In Stock
Item #: 40014 -

Cam Caps replacement bolts for SR20VE cylinder head.

Mazworx Billet Full Race Short Block - SR20
Retail: $11,555.00
Price: $10,979.00
Availability: Built to Order 3-4
Item #: SR20 30200 -

Our Drag Race SR20 Short Block, includes a 91mm Stroker rotating assembly. We rate this short block to 1200+hpThe Mazworx Drag Race Billet SR20RWD is built with the following components:- Mazworx Billet SR20 Block- Mazworx SR20 91mm Billet Crankshaft- Proprietary, Mazworx Sleeving (Darton Sleeves)- Custom CP Pistons- .250" wall thickness upgraded Wrist Pins- GRP Aluminum Rods- Calico Coated ACL Race Rod and Main Bearings- New oil pump- Mazworx Front Oil Squirter- Oil groove machining- Fully...

Mazworx Billet Full Race Short Block - 2JZ
Retail: $19,459.00
Price: $18,485.00
Availability: Built to Order 3-4
Item #: 2JZ 32 DBSB -

The Ultimate Drag Racing 2JZ Short Block, includes a Stroker rotating assembly. This is the setup that has been 5secs@1/4mile, running close to a 100psi of boost on Methanol.The Mazworx Drag Racing 2JZ Short Block is built with the following components:- Mazworx Billet 2JZ Block with Aluminum Main Caps- Custom Stroker Crank- Proprietary, Mazworx Sleeving (Darton Sleeves)- Custom CP Pistons- .250" wall thickness upgraded Wrist Pins- GRP Aluminum Rods- ACL Race Rod and Main Bearings- Mazworx...

Mazworx Stage 1 Short Block - 4G63
Retail: $4,929.00
Price: $4,782.50
Availability: Built to Order 3-4

Our Stage 1 Short Block is ideal for your EVO. Your new short block is built from a brand new case from Mitsubishi to ensure the highest of quality. We rate our Stage 1 Short Block up to about 500hp. Each block is cleaned, inspected, machined and built, IN-HOUSE.The Mazworx Stage 1 4G63 is built with the following components:-NEW OEM 4G63 Block-NEW Manley Forged Crankshaft-CP 85.5mm Forged Pistons-Manley H Beam Connecting Rods-ACL Race Rod and Main Bearings-ARP Main Studs- Balance Shaft...

Mazworx Stage 2 Short Block - 4G63
Retail: $5,475.00
Price: $5,309.00
Availability: Built to Order 3-4

Our Stage 2 Short Block is ideal for your EVO. Your new short block is built from a brand new case from Mitsubishi to ensure the highest of quality. We rate our Stage 2 Short Block up to about 650hp. Each block is cleaned, inspected, machined and built, IN-HOUSE.The Mazworx Stage 2 4G63 is built with the following components:-NEW OEM 4G63 Block-NEW Manley Forged Crankshaft-CP 85.5mm Forged Pistons with Upgraded Wrist Pins-Manley Turbo Tuff Connecting Rods-ACL Race Rod and Main Bearings-ARP...

Mazworx Stage 3 Short Block - 4G63
Retail: $6,895.00
Price: $6,679.85
Availability: Built to Order 3-4

Our Stage 3 Short Block is ideal for your EVO. Your new short block is built from a brand new case from Mitsubishi to ensure the highest of quality. We rate our Stage 3 Short Block up to about 1000hp. Each block is cleaned, inspected, machined and built, IN-HOUSE.The Mazworx Stage 3 4G63 is built with the following components:- NEW OEM 4G63 Block- NEW Manley 100mm Billet Crankshaft- Custom CP 85.5mm Forged Pistons with Upgraded Wrist Pins- Carrillo Pro-H Connecting Rods-ACL Race Rod and Main...

Mazworx SR20 Billet Main Caps
Price: $449.00
Availability: In Stock
Item #: 91101 -

Add strength to your SR block with our SR20 Billet Main Caps. Caps are machined from pure 4140 chromoly steel. New Mazworx SR20 Billet Main caps accept standard size main studs. The Block does not need to be machined to accept 1/2" main studs. A line bore/hone will be needed once these are installed. We can provide these services if needed.

SR20DET/VE Exhaust Flange (1-1/4" Pocket)
Price: $45.00
Availability: In Stock
Item #: 965525 -

Specifications: - Made from 1/2" thick 1018 cold rolled steel - CNC machined - Stepped to accept 1 1/4" sch. 10 pipe- Better fit for a Twin Scroll Manifold setup Made in the USA.

Mazworx SR20 Top Mount Manifold and Precision Turbo Combo
Retail: $2,184.99
Price: $1,959.99
Availability: In Stock
Item #: TUR 30263 95735A425 x4 70001 T3 70200 PTE 505- -

Mazworx's Top Mount Turbo and Manifold Combo. This setup is capable of making over 500whp! Features the following items : Mazworx SS Series Top Mount Manifold Precision Turbo SP Cover CEA Billet Complete oil feed and oil drain stainless steel braided lines.Includes Mounting bolts and Gasket.

Mazworx Billet Water Neck Outlet
Price: $85.00
(1)
Availability: In Stock
Item #: 10400.20 -

CNC machined billet water neck outlet for the SR20. Replaces your factory water neck with this T-6061 billet unit. Increased water flow and better fitment. Includes: - 1/8" NPT on top - 1/4" NPT on front Neck is machined for -16an

SR20VE Stage 1 Cylinder Head All Motor
Price: $2,139.00
Availability: Built to Order 1-2
Item #: SR20VE H Stg 1 AM -

Here at Mazworx, we can build your cylinder head to your specifications. Utilizing our CNC capabilities and state-of-the-art equipment, you can ensure that the machining process is done properly. If you want a cylinder head that is ready-to-bolt-on, see the specifications section for info. For more understanding of our process, see the additional information section. Each built head will start with the following: Hot Tank Cleaning:Wash your head to get oil and grim off.Sand Blast Head:Since...

Mazworx VVL Solenoid Relocation Blocks
Price: $159.99
(1)
Availability: Discontinued
Item #: 1018 -

These are CNC machined from T-6061 billet aluminum. Required to be used when converting to a VVL head on your RWD SR20. These will move the VVL solenoids away since they will hit the firewall. Complete fittings and lines kit also available. Please check the options if you require the fittings and lines. Black lines and fittings also available.

SR20VE Stage 1 Cylinder Head Turbo
Price: $2,509.00
Availability: Built to Order 1-2
Item #: SR20VE H Stg 1 -

Here at Mazworx, we can build your cylinder head to your specifications. Utilizing our CNC capabilities and state-of-the-art equipment, you can ensure that the machining process is done properly. If you want a cylinder head that is ready-to-bolt-on, see the specifications section for info. For more understanding of our process, see the additional information section. Each built head will start with the following: Hot Tank Cleaning:Wash your head to get oil and grim off.Sand Blast Head:Since...

SR20VE Stage 2 Cylinder Head Turbo
Price: $2,739.00
Availability: Built to Order 1-2
Item #: SR20VE H Stg 2 -

Here at Mazworx, we can build your cylinder head to your specifications. Utilizing our CNC capabilities and state-of-the-art equipment, you can ensure that the machining process is done properly. If you want a cylinder head that is ready-to-bolt-on, see the specifications section for info. For more understanding of our process, see the additional information section. Each built head will start with the following: Hot Tank Cleaning:Wash your head to get oil and grim off.Sand Blast Head:Since...

Mazworx VE/RWD Conversion Oil Pickup
Price: $130.00
Availability: In Stock
Item #: 15050-VERWD -

This is required when doing a VVL/VE cylinder head conversion. Utilizes a S14 blacktop pickup and a VE oil pickup. The larger inlet tube on the VVL is required for the bigger VVL oil pump.

Mazworx Billet Water Neck Inlet
Price: $50.00
Availability: In Stock
Item #: 10400.10 -

CNC machined billet water neck inlet for the SR20. Replaces your factory water neck with this T-6061 billet unit. Installs directly to the block. Requires removal of the OEM thermostat housing. Increased water flow and better fitment. Neck is machined for -16an fittings. Oring included

SR20VE Stage 3 Cylinder Head Turbo
Price: $3,519.00
Availability: Built to Order 3-4
Item #: SR20VE H Stg 3 -

Here at Mazworx, we can build your cylinder head to your specifications. Utilizing our CNC capabilities and state-of-the-art equipment, you can ensure that the machining process is done properly. If you want a cylinder head that is ready-to-bolt-on, see the specifications section for info. For more understanding of our process, see the additional information section. Each built head will start with the following: Hot Tank Cleaning:Wash your head to get oil and grim off.Sand Blast Head:Since...

Mazworx SR RWD Rear Block Oil Drain Plug
Price: $12.99
Availability: In Stock
Item #: 11183 -

When installing a FWD head on a RWD block, the FWD head does not have the extra oil drain in the back.  This plug blocks off the the drain hole in the block.  Includes orings. 

RWD VVL Conversion Timing Pointer
Price: $49.99
Availability: In Stock
Item #: 11185 -

Mazworx VE Head Water Neck Block-Off
Price: $19.99
Availability: In Stock
Item #: 11142 -

This blocks off the water line under the intake manifold flange on an SR20VE head.  Oring included.