Price: $125.00
    Injector Size:

    Oring x Length:


    Update price
    Quantity:
    There are no reviews yet. | Write a review

    Price is per injector.

    High Impedance, no need for injector drivers or injector resistors High pressure capability, All injectors will run comfortably at 100psi above 10v, flow will be increased by approximately 50% at 100psi High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1% Excellent low pulsewidth response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulsewidth response can be linearized to practically zero flow. Good atomization, Droplet size of the 1000cc injector is comparable to the Siemens Mototron 60lb injector, and is far better than the Multec 95lb, Standard Motor Products (RC) 1000cc and Siemens 72 and 83lb injectors. Excellent consistency, no sets will require more than a 1% trim Ruler flat response, unmatched linearity means easy tuning and accurate compensations.

    PLEASE NOTE! ID2000 INJECTORS ARE NOT COMPATIBLE WITH Q16 AND VP IMPORT. THEY ARE COMPATIBLE WITH C16, C23, E85, E98 AND METHANOL.