Products 337-348 of 448
Show
Nissan SR-VET Metal Head Gasket 11044-8h600, VET, allmotor, na, bored, gasket, VVL, turbo, naturally, aspirated, OEM, SR20, SR20DET, SR20VE, SR20VVL, 20V, P11, P12, S13, S14, S15, B13, B14, Pulsar, GTiR, FWD, RWD, 240SX, 200SX, 180SX, Silvia, NeoVVL, Kouki, Zenki, Sunny
Price: $70.00
Availability: In Stock
Nissan Item #: SRHGVET -

Here is a OEM SR20VET Metal Head Gasket. 1.1mm thickness. We offer these in a variety of bore sizes.

Kelford Cams SR20VE 184-E Racing Camshaft Set
Price: $995.00
Availability: Special Order
Kelford Cams Item #: 184-E -

318/312 Racing Cams to suit large capacity, individual runner drag or track racing engines. Ideal in a light car with close gears. Not for street cars.VVL Killer option will put the big cam on the outer lobes.  Center lobe is machined off.  Allows you to remove the VVL actuation.  Only for race motors.

Kelford Cams SR20VE 184-T Turbo Drag Racing Camshaft Set
Price: $995.00
Availability: Special Order
Kelford Cams Item #: 184-T -

292/303 Duration, 11.40mm Lift. Nissan SR20VE camshafts for high HP TURBOCHARGED engines for drag racing. Low lobe spec is: 260 duration, 10.20mm lift both sides.VVL Killer option will put the big cam on the outer lobes. Center lobe is machined off. Allows you to remove the VVL actuation. Only for race motors.

Kelford Cams SR20VE 184-C Racing Camshaft Set
Price: $995.00
Availability: Special Order
Kelford Cams Item #: 184-C -

314/312 Duration, 12.50mm/11.80mm Lift. Racing camshafts to suit well modified high compression stroker motors. Low lobe spec is: 252 duration 10.2mm lift intake. 248 duration 8.3mm lift exhaust.

Apexi SR20DET Metal Head Gasket SR20, SR20DET, S13, S14, S15, RWD, 240SX, 200SX, 180SX, Silvia, Kouki, Zenki
Price: $249.00
Availability: Special Order
Apexi

The A'PEXi metal headgaskets provide upgraded protection on high horsepower engines. Factory headgaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory headgasket. A'PEXi recommends replacing the factory headgasket with a metal one before gasket failure causes more damage to the engine. The gaskets are all designed engine specific and provide a complete and secure seal A'PEXi labels...

Mazworx SR20 1/2" Headstud Kit
Price: $225.00
Availability: In Stock
Mazworx Item #: 11000 -

Mazworx 1/2" headstud kit is a must for any high horsepower SR20 engine. We recommend these for anything over 600whp. Your block and head will have to be machined to fit these headstuds. We can provide the machining service for your components if you require it.

Mazworx SR20 Head stud Kit
Price: $189.99
Availability: In Stock
Mazworx Item #: 11001 -

Upgrading your stock headbolts is a necessity when building a upgraded motor. Here are the Mazworx SR20 headstud kit. These are the correct length that will completely bottom out and provide extra clamping force needed. ARP2000 is capable of achieving clamp loads in the 215,000-220,000 psi range. ARP2000 is used widely in short track and drag racing as an up-grade from 8740 chrome moly in both steel and aluminum rods. Stress corrosion and hydrogen embrittlement are typically not a problem,...

CP Pistons Set, SR20VE SR20, SR20DET, SR20VE, SR20VVL, 20V, P11, P12, S13, S14, S15, B13, B14, Pulsar, GTiR, FWD, RWD, 240SX, 200SX, 180SX, Silvia, NeoVVL, Kouki, Zenki, Sunny
Price: $635.00
Availability: In Stock
CP-Carrillo

The turbo pistons will come with a new redesign dish for improved combustion. The valve reliefs will accommodate 35.15mm intake valves and 31.15mm exhaust valves and are 2mm deeper than factory. Comes with: - Rings - Wrist pins - Clips * Indicates CR using Mazworx CNC Combustion Chamber.

CP Pistons Set, SR20DET SR20, SR20DET, S13, S14, S15, RWD, 240SX, 200SX, 180SX, Silvia, Kouki, Zenki
Price: $635.00
Availability: In Stock
CP-Carrillo

Includes: - Pistons - Rings - Wrist Pins.

ACL SR20DET RWD Oil Pump
Price: $244.99
(1)
Availability: In Stock
ACL Item #: OPNS1342 -

Orbit, a parent company of ACL Race Bearings, introduces there line of OEM oil pumps. These units exceeds all manufacturers specifications and are built to last. All oil pumps are made from die cast ADC-12 anodized aluminum for added strength and reduced weight. Each pump gear are precisely machined with tight tolerances for optimum pressure and flow. Each are made with steel copper alloy (FCO0205) gerotors that assure dependable service and reliability. This will fit the S13, S14, and S15...

Nissan SR20VE Metal Exhaust Manifold Gasket
Price: $35.00
Availability: In Stock
Nissan Item #: 14036-AW000 -

Nissan OEM SR20VE Exhaust Manifold Gasket.

Mazworx SR20DET RWD Oil Block Adapter, Single Port
Price: $99.00
Availability: In Stock
Mazworx Item #: 30002 -

Factory OEM oil block tends to break and lose oil pressure which can lead to devastating engine failure. This can also be used for external oil coolers or oil filter relocation. You can utilize your factory oil pressure sensor and additional port for aftermarket gauge or whatever you may want to put to it. This is mainly used for dry sump oiling systems. Comes with -10an ORB fitting and 4 mounting bolts. Made from 6061-T6 billet aluminum. CNC Machined.