Mazworx SRVQ Adapter kit comes with a new bell housing for easy installation on S-chassis Nissan.
The kit includes:
- SR-VQ bellhousing and Hardware
- Driveshaft (options available) *Driveshaft pictured is the carbon fiber option
- S-Chassis/Z33 Transmission Crossmember
- Z33 Short Shifter and Shifter Bracket
- Shifter Cover
- Roller Pilot Bearing and Recess Tool
- Front Cover Gasket and Input Shaft Seal
Driveshaft weights:
19lbs Mild Steel
15lbs Aluminum
16lbs Carbon Fiber
Hydraulic release bearing kit is recommended for multidisc clutches. Check and make sure your clutch requires a 44mm bearing.
*If you purchase a new CD009 transmission or a used unit without the shifter assembly you will need to buy the reverse lockout hardware separate.
*If you're installing this kit on to an S15 SR20 you will need to convert from the factory dual-mass flywheel to the S13/S14 style flywheel/clutch. The S15 kit is made to use the S15 diff.
*The bellhousing is machined for a VQ35DE transmission. If you have an VQ35HR or VQ37VHR(370Z), then you will need the proper adapter ring.
SRVQ Installation Instructions