Products 409-420 of 538
Show
Availability: In Stock
Nissan
Item #: 13257-53J03 -
OEM Nissan Rocker Arm.You have the option for us to grind it for dual guide conversion.
Availability: In Stock
Mazworx
Item #: 10157 -
Made from 1/2" 6061-T6 and sized at 24" x 24", this adapter plate gives you the correct pattern to mount a GM bell housing to your SR20 RWD block. This plate also stands the engine straight up instead of it's normal lean to the exhaust side. This is used in chassis drag cars. You will have to trim the outside profile to match your chassis. Comes with engine bolts.
Availability: Call for Availability
Mazworx
Item #: 100101 -
Mazworx SR20 91mm Stroker kit is designed to use with turbo setups. This kit features the 91mm billet crankshaft, your choice of rods (depending on hp level) and CP Pistons designed to your specs.This crank requires 1/2-20 flywheel bolts. So machining to your flywheel is required.
Availability: Special Order
Kelford Cams
Item #: 186-C -
284°/290° | 12.50mm/12.10mm Valve Lift284°/290° racing cams to suit well built competition engines with ported head and bigger valves. Turbo size 67mm+. Fuel type E85 or methanol. Profiles can be used in RWD SR20DET engines with solid lifter conversion.
Availability: In Stock
Mazworx
Item #: 11183 -
When installing a FWD head on a RWD block, the FWD head does not have the extra oil drain in the back. This plug blocks off the the drain hole in the block. Includes orings.
Availability: In Stock
Mazworx
Item #: 70102 -
Made from 304 Stainless steel and Tial MVR wastegate flange.
Availability: Special Order
ACL
Item #: 7M2394H 6B2390H -
They are an H-Series (harder material and more clearance) race bearing. These can be used in standard rebuilds or all out race motors.
Availability: Special Order
ACL
Item #: 7M2394H 6B2960H -
They are an H-Series (harder material and more clearance) race bearing. These can be used in standard rebuilds or all out race motors.
Availability: Special Order
ACL
Item #: 7M2428H 6B2960H -
They are an H-Series (harder material and more clearance) race bearing. These can be used in standard rebuilds or all out race motors.
Availability: In Stock
Mazworx
Item #: 11142 -
This blocks off the water line under the intake manifold flange on an SR20VE head. Oring included.
Availability: Back Order
Item #: 183.3 -
These coils work great in COP CDI coversions. Eliminate spark plug wires all together and have enough spark energy for over 800hp. Must use Denso Iridium plugs, these coils attach to the plug by pressing on to the top, they require a plug that the tip can unscrew from. The Denso Iridiums are the only ones we've found that work well and come in the necessary heat ranges for high hp motors.Works well on these engines:SR20VQ35B18/B16
Availability: In Stock
Mazworx
Item #: 10420 -
This plate allows you to remove the OEM water pump in order to run an Electric Water Pump. Fits all SRs except the GTi-R block.